---

HOW THEY ARE MADE AND OTHER INFO           BROWSE BOWLS BY PRICE, SIZE, STYLE, ETC

NOT AVAILABLE
C171 --- $NOT AVAILABLE --- this is the orientation view --- more pics down below

diameter: 8 1/2"
height: 2 1/2"

finish: 8 thin coats of satin-finish spar polyurethane (with UV blocker)

WOODS USED: [SEE DISCUSSION ON THE MAIN PAGE OF THIS SITE IF ANY OF THIS IS UNCLEAR]

base: afrormosia

view 1: Honduras rosewood, Honduras rosewood, yellowheart, cocobolo, BOX

view 2: mahogany, Siam rosewood, paela, BOX

view 3: canary, Honduras rosewood, sapele, BOX

view 4: Gaboon ebony, redheart, curly maple, BOX

view 5: curly mahogany, leopardwood, cocobolo, BOX

view 6: panga panga, bloodwood, curly maple, BOX

view 7: olive, padauk veneer, olive, all over padauk over poplar, then Honduras rosewood, sapele, BOX

view 8: cocobolo, panga panga, paela, BOX

BOX: wedges up the middle are wenge, bloodwood, machiche, yellowheart, purpleheart. Up the sides are maple, sapele, Gaboon ebony, osage orange, machiche, basswood(?), Gaboon ebony

flaws/issues: The glue line where the base joins the bowl was slightly sloppy in view 1 and you can see a less than perfect joint there, but it's minor. The afromosia of the base has a couple of thin cracks in view 2 where it joins the base --- also minor.

comments: The canary in view 3 is highly chatoyant. The inner Honduras rosewood piece in view 1 is from a small plank that had just an amazing figure

---

views 3c and 5c


views 7c and 5d


views 4b an 7b

---

view 1c as the bowl blank and then as the finishe bowl